MODPROD 2012

<–previous		next–>

The 6th MODPROD Workshop 2012, February 7-8, Linköping University

”Model Interoperability Technology Trends and Needs”

Organizers: Peter Fritzson, Petter Krus, Kristian Sandahl

Welcome by the Organizers/ MODPROD Center Presentation:

Peter Fritzson and Petter Krus, Linköping University, Presentation of Research at the Center for Model-based Product Development, MODPROD Part1 and Part2

Tutorials

• Tutorial 1: Peter Fritzson and Olena Rogovchenko, Linköping University, ”Introduction to Object-Oriented Modeling and Simulation with Modelica using OpenModelica”
• Tutorial 2: Wladimir Schamai, EADS and Adrian Pop, Linköping University, ”Automated Requirements Verification Model Composition in ModelicaML – Using ModelicaML Value Bindings” and ”Model-based Development using Modelica MDT Eclipse plug-in with Run-Time Debugging”
• Tutorial 3: Edward A. Lee, Professor at UC Berkeley, USA, ”Modeling, Simulation, and Design of Concurrent Real-Time Embedded Systems Using Ptolemy”
• Tutorial 4: Hubert Thieriot, CEP, Paris and Kaj Holmberg, Linköping University. ”Model-Based Optimization – Theory and Hands-on Using the OpenSource OpenModelica OMOptim Tool” and ”Optimization – An introduction”
• Tutorial 5: Petter Krus, Linköping University. ”System simulation with HOPSAN NG”

Keynote Presentations

Keynote: Roger Germundsson, Technical Director, Wolfram Research, USA. ”Modeling, Simulation and Analysis using MathModelica & Mathematica” (cdf-reader/player required: download at http://www.wolfram.com/cdf/)

Keynote: Edward A. Lee, Professor at UC Berkeley, Director of the Berkeley Center for Hybrid and Embedded Software Systems and of the Ptolemy project, California, USA. ”Heterogeneous Actor Models”

Keynote: John Baras, Professor at University of Maryland, Washington DC, and Founding Director of the Institute for Systems Research, USA. ”COMPASS: Component-based Architectures for Systems Synthesis”

Presentations

Session 2a Model-Based Design and Quality Assurance

• Lena Nilsson, Swedish Road and Traffic Institute, Linköping, Sweden. ”Human-Centered Design and Research Using Simulation”
• Johan Ölvander, Linköping University and Magnus Carlsson, Saab AB, Sweden. ”Model-Based Collaborative Engineering”
• Petter Krus, Linköping University, Sweden. ”Whole Aircraft System Simulation for Aircraft Preliminary Design”
• Reno Filla, Volvo CE, Sweden. ”Quantifying Operability of Working Machines”

Session 2b Integration in Model-Based Engineering

• Matthias Biehl, KTH Royal Institute of Technology, Sweden. ”Systematic and Cost-efficient Tool Integration for Embedded Systems – the iFEST approach”
• Roland Almgren, KnowIT AB, Sweden. ”Product Modeling at Industrial Scale Complexity – Information Modeling in OPENPROD”
• Sune Horkeby, Siemens Industrial Turbo Machinery AB, Sweden. ”Integration of Engineering Applications with SOA”
• Christoph Höger, Christoph Nytsch-Geusen, Universitet der Künste Berlin / Fraunhofer-FIRST, Berlin, Germany. ”3D Visualization of Building Applications”

Session 4a Model-Based Design and Engineering

• Mattias Nyberg, Scania, Sweden. ”Modeling of Failure Propagation in Automotive Mechatronic Systems”
• Lars Mikelsons, Bosch Rexroth, Germany. ”Towards Generic Models”

Session 4b Model-Based Engineering

• Mongi Ben Gaid, Abir Ben Khaled, Nicolas Pernet, IFP Energie Nouvelles, Paris, Daniel Simon, INRIA Rhône Alps, France. ”Multi-Core Simulation of Internal Combustion Engines Using Modelica, FMI and Xmod”
• Bernhard Bachmann and Willi Braun, Bielefeld University of Applied Sciences, Germany. ”FMI 2.0 Functional Mockup Interface for Tool and Model Interoperability”

Session 5a Model-Based Engineering and Applications

• Michael Strobel, Fraunhofer Institute for Wind Energy and Energy System Technology, Germany. ”An Approach for Data Consistency in Wind Turbine Development”
• Johan Andreasson, Modelon AB, Sweden. ”Vehicle Dynamics Simulation with the Modelica Vehicle Dynamics library”
• Kristian Amadori, Linköping University, Sweden, ”Geometry-based Design for Aircraft Design Optimization”

Session 5b Model-Based Systems Engineering

• Wladimir Schamai, EADS & Linköping University, Germany. ”Automated Requirements Verification Model Composition in ModelicaML”
• Henric Andersson, Saab Aeronautics, Sweden. ”A Model Family Approach for Reuse of Multipurpose Models”
• Jan Nilsson, Siemens Industrial Turbo Machinery AB, Sweden. ”Configurators for Complex Industrial Products with High Degree of Customization”

Session 6a Model-Based Design and Development

• Martin Sjölund, Mahder Gebremedhin, Kristian Stavker, Peter Fritzson, Linköping University, Sweden. ”Parallel Computing Using Modelica”
• Martin Sjölund, Linköping University, ”Transformational Debugging of Equation-Based Models”
• Andrea Benigni, Aachen Technical University, Germany. ”Simulation in Support of Home Energy System Design: An Experience”

Session 6b UML-based Software Engineering

• Tomas Wiman, Adocus AB, Sweden. ”Turning a Standard UML Modeling Tool into a SysML/ModelicaML Model-ing Tool by Use of MetaModelAgent”
• Tony Gorschek, Blekinge Institute of Technology, A Large-Scale Empirical Study of Practitioners’ Use of Object-Oriented Concepts and Models
• Nenad Ukic, Ericsson Nikola TeSla, R&D Center, Croatia. ”Modeling Diameter Protocol WithXtuml: (Ma)Xdia Project Experiences”